How Long Does Asphalt Paving Last?

Asphalt Paving Charleston SC can significantly impact how long it will last. The mix, thickness, and compaction of the asphalt all affect how long it will hold up to traffic and weather elements.

Look for a paving contractor offering these services to ensure you get a good quality job.

asphalt paving

Asphalt is a popular choice for paving because of its durability. It is a highly versatile material that can be used for roads, driveways, and parking lots. Compared to concrete, which cracks easily due to cold weather and water damage, asphalt lasts much longer. A well-maintained asphalt surface can last up to 40 years or more.

One of the reasons for asphalt’s durability is its strength and ability to withstand heavy vehicle traffic. It can withstand repeated cycles of loading and unloading without suffering significant damage. However, it’s important to keep in mind that the durability of asphalt is influenced by environmental factors, such as temperature, rainfall, and sun exposure.

When mixed with the right amount of aggregate, asphalt can withstand high temperatures. However, if the pavement is exposed to extreme temperatures for long periods of time, it can weaken its structure and lead to premature failure. Heat can also cause asphalt to oxidize, which reduces its stiffness and resistance to deformation. This can also cause the pavement to become rutted and damaged.

In order to prevent this, contractors can use an additive that increases the stiffness of the asphalt mixture. Various materials have been used for this purpose, including recycled rubber, crushed glass, and treated swine manure. This additive is expensive, but it can greatly improve the durability of asphalt pavements.

Another way to increase the durability of asphalt is by increasing its in-place density. While higher densities are typically only achieved in high-quality, newer construction methods, they can help to extend the life of asphalt pavements by preventing bottom-up fatigue distress.

The process of laying down asphalt starts with grading the site. Contractors slope the pavement toward grassy areas to help drainage and prevent water buildup underneath the pavement. The next step is to put down a base layer, which is made of dense, load-bearing aggregates. A binder layer is then placed on top of this. Typically, this is made of finer, more compacted asphalt.

In addition to ensuring that the asphalt meets specifications and quality standards, testing is done throughout the mixing process to check for proper consistency. This allows the contractor to make adjustments as needed and ensure that the pavement will be able to meet its intended function.

Asphalt might seem dull at first glance, but it has a dark beauty that stands out against concrete buildings and landscaping. It’s sleek surface is also easy to clean and resists stains and damage better than some other paving materials. With its ability to be easily modified, asphalt offers design flexibility and a range of creative solutions that can make your commercial property more visually appealing.

The basic composition of asphalt includes stone (aggregate), sand, additives and liquid asphalt or bitumen to hold the aggregates together. These ingredients are mixed in batches at special processing plants. Plant operators measure and blend the ingredients based on the specific climate at the project site. Hot mix asphalt is typically used for high-traffic areas and provides superior durability. Cold mix asphalt is less expensive and suitable for smaller projects.

Another unique attribute of asphalt is its noise-reducing properties. The material is quieter than other paving options, such as concrete, because it absorbs sound instead of reflecting it. Its acoustic qualities are a major contributor to why it is often used on roads and highways.

With its innate beauty and range of design options, asphalt is the perfect choice for any outdoor space. Whether it’s a parking lot, road or other walkway, it can add style and sophistication to any business. Its versatility also makes it an attractive option for public spaces, allowing for easy-to-read signage and eye-catching colors that will attract customers to your business.

Asphalt can be customized to meet your specific aesthetic needs by using a variety of sealing, crack filling, resurfacing and line painting techniques. By adding these features to your pavement, you can customize its appearance and extend its longevity. For example, you can seal asphalt to protect it from water, oil, and sunlight. Asphalt surface treating also helps reduce its permeability and improves traction.

Asphalt is a budget-friendly material that provides great value to your property. The comparatively low cost of asphalt makes it an ideal option for residential driveways, sidewalks, parking lots and roads. It also looks beautiful and lasts longer than other paving materials such as concrete. Asphalt paving requires regular maintenance to keep it looking good and functioning properly. Regular sealing and repairs to cracks and holes will ensure your pavement retains its beauty for a long time.

The material is easy to work with and does not require as much labor as concrete. It is also more affordable to maintain because it is less prone to cracking. Asphalt pavement can be easily repaired using a special crack filler that is available at your local hardware or home improvement store.

This product works by bonding the cracks with an adhesive substance, which will help prevent water from seeping through to the sub base. This will prolong the life of your asphalt surface and prevent costly repairs in the future.

Another benefit of asphalt is that it dries quicker than concrete. This means you can get back on your road faster and avoid the orange barrels and lane closures that are usually associated with other types of paving projects. It is also a more environmentally friendly material since it uses recycled materials and produces less fumes during paving.

Asphalt is made up of stone (aggregate) sand, additives and liquid asphalt (petroleum). Liquid asphalt is what holds the aggregate together. The mix is heated at an asphalt plant to make it hot and then transported by dump trucks to the paving site. It is kept hot during the entire paving process to prevent it from cooling, which would cause it to lose its binding properties.

Cold asphalt mixes are used for patching and lesser-trafficked service roads. These are produced by emulsifying hard grade blown bitumen in water with an emulsifying agent. This mixture stays soft in cold temperatures and repels water, which is why it is primarily used for pothole repair. This type of asphalt is not as durable as HMA and has a shorter lifespan, but it offers similar benefits to homeowners.

The asphalt paving process requires the use of power machinery and heavy equipment, so safety is always a priority. Workers must wear proper personal protective equipment to avoid exposure to physical, environmental and chemical hazards.

Typical PPE includes thermally-insulated gloves, coveralls and boots, to protect the skin from contact with hot materials. It’s also important to keep a fire extinguisher nearby, preferably rated type B or ABC. It should be easily accessible to employees.

Asphalt contains petroleum, so it is flammable. It’s important to avoid smoking and using open flames near the asphalt. Make sure to have a firebreak in place if the area gets too close to a flame source. Workers should also be careful around electrical lines, which could cause an electrocution if they are touched.

Working with asphalt is hazardous because it’s extremely greasy and sticky. If it comes into contact with bare skin, it can burn the skin and irritate the eyes and respiratory tract. It can also soak into clothing, which can leave behind toxic stains and odors.

Paving should be done in dry conditions with moderate temperatures. Extreme temperatures can make the asphalt too soft to work with, while extreme cold can prevent it from curing properly. Workers should look out for potential tripping hazards, like manholes and catch basins, and mark them clearly. It’s also important to check the weather report before starting a project, as rain can affect the quality of the finished product.

The first step in the paving process is to grade the road. Contractors slope the surface to allow water to drain away from the road and prevent it from sitting on the asphalt. A sub-base layer is then laid, which consists of crushed stones that are typically mixed with bitumen. This helps reduce rutting by evenly distributing traffic and environmental loads.

The binder course is then put down, which provides stability by combining qualities of durability and stiffness. It should be designed to withstand the highest shear stresses to minimize rutting, while still allowing sufficient stone-on-stone contact and a flexible base layer.

Preparing Your Asphalt For Sealcoating

Sealcoating is an inexpensive way to dramatically extend the life of your asphalt driveway or parking lot. It restores the deep black appearance and forms a protective barrier against UV rays, water, oil and other oxidizing substances.


Before sealcoating, fix any damage in the pavement. Untreated damage will only get worse, requiring expensive repairs.

The preparation process for sealcoating is a critical step to ensuring success. The surface must be free of oil, chemicals, gasoline and other petroleum-based substances that can interfere with the sealer. This can be done with power washing and sweeping equipment, or a blower. If these fluids are left on the pavement surface, they can damage the bond between the asphalt and the new coating.

Before applying the sealer, it is important to choose a high quality product and mix it according to the manufacturer’s specifications. This is especially true for sand-based sealcoating mixes, as they require constant agitation to maintain consistency and prevent clumping. The sand also helps add texture to the surface, making it less slippery. This is an additional benefit that can reduce liability in parking lots, where slippery surfaces can lead to accidents and injuries.

The process of sealcoating is most effective on asphalt surfaces in good condition. It will not repair or restore cracks or dry patches of asphalt, so these areas should be repaired before the sealing process begins. The seal coat should be applied in layers that are thick enough to protect the asphalt from sunlight and moisture. If the sealcoat is applied too thin, it will allow the sun’s UV rays to penetrate and degrade the asphalt binder.

Sealcoating also helps to improve the visual appeal of your driveway or parking lot. Over time, the sun can make asphalt appear washed out and gray. Seal coating will help to restore the asphalt’s deep black appearance and will also protect the pavement from moisture and oxidizing substances.

Unsealed asphalt can become brittle and crumble, leading to potholes. Sealcoating will help to block out elements that cause oxidation, such as water and motor oil, and can keep the asphalt binder flexible for a longer period of time. This will help to prevent the formation of potholes, which can be extremely dangerous for pedestrians and vehicles. It is recommended that you have your pavement sealed every few years, in order to maintain the best possible function and visual appearance.


Before a contractor can begin the sealcoating process, they must first assess the asphalt surface. They look for oil stains, cracks, potholes, and other areas of damage that need immediate repairing. After the assessment is complete, they must block off the area that will be treated and clear the pavement of any debris using brooms or blowers. A thoroughly cleaned surface will allow the sealant to bond properly with the asphalt.

During this time, the crew should also fill any potholes in the asphalt with an asphalt patch material before applying the sealcoat. Once the patching is done, it’s important to wait 24 hours before driving over the area again. The sealcoat will take this period of time to dry and cure, dependent on weather conditions.

The next step is to mix the sealcoat material. The contractors can choose to spray the product or squeegee it onto the pavement. Both methods have their pros and cons, but spraying is more efficient since the crew can cover larger areas in a fraction of the time it would take them to use a squeegee. However, there’s a chance that the spray method could cause the crew to miss spots and apply a thinner coat.

There are two types of sealcoat materials: coal tar-based and asphalt emulsion-based. The former is more durable, but it can be environmentally hazardous and has legality issues in some regions. The latter is safer and is a combination of asphalt cement and water. It also contains additives that help it resist oxidation, water damage, and other elements.

As the sealcoat dries, it creates an invisible barrier over the asphalt that protects the surface from harmful environmental factors. It also helps to stop the sun’s UV rays from deteriorating the asphalt. It will slow down oxidation, extend the life of the asphalt, and keep it looking new for a long time.

The sealcoat is usually applied in two coats and requires a minimum of 24 hours to dry. After the drying and curing process, it’s important to protect the newly-applied sealcoat from traffic, rain, dirt, and chemicals. Regular maintenance will prolong the life of the sealcoat, including periodic resealing and repairs.


Seal coating is a cost-effective maintenance option for asphalt pavement. It protects against oxidation, stops weather damage and beautifies the surface. A quality sealcoat can extend the life of a driveway or parking lot for years. However, the process is labor intensive and must be done properly. A professional company is best suited for the job.

Pavement needs to be clean and dry to ensure proper adhesion of the seal coat. Effective cleaning methods include blowing and sweeping. However, it may be necessary to use a power washer for stubborn dirt and oil. It’s important to avoid using harsh chemicals that can harm the asphalt.

A properly maintained driveway will increase the value of your home and make it more aesthetically pleasing. It will also reduce the risk of accidents and injury. A slick driveway is dangerous for cars and pedestrians, and seal coat adds friction to the material to help prevent slippage.

The most common reason for applying a seal coat is to restore the appearance of faded asphalt. The sun’s UV rays break down the carbon bonds in asphalt, which causes it to turn gray and wash out over time. A Pittsburgh driveway sealer can restore the pavement’s original, jet black appearance and improve the curb appeal of your property.

Asphalt is a combination of rock and stone and gravel held together with a binder, which is a petroleum-based substance. When this substance degrades, the aggregate becomes brittle and begins to crack. The deterioration of asphalt surfaces can be slow and gradual, but it will eventually cause permanent damage. Sealcoating can prolong the lifespan of asphalt by protecting it from harmful chemicals, rain and UV rays.

Besides beautifying your driveway or parking lot, it can increase the resale value of your home and save you money on fuel costs. It also helps to prevent potholes and other costly damages. To get the most out of your asphalt, it should be sealed every two to three years.

The ideal time to perform a seal coat is during the spring through fall. This is when temperatures are warm and there is a low chance of rain. However, it’s important to check the forecast regularly as conditions can change at any time.


Sealcoating is a relatively inexpensive maintenance procedure that prolongs the life of asphalt surfaces. It costs a fraction of the price of completely replacing the surface with blacktop. Additionally, it helps to prevent more expensive damage to your pavement by blocking moisture that would otherwise exacerbate cracks and potholes.

The cost of sealcoating varies depending on your location, the type and thickness of sealant you choose, and the size of the area being coated. Typically, the more asphalt that needs to be sealed, the higher the cost will be. It also depends on whether you want to add color to the sealant, which can raise the cost by a significant amount.

Before any sealing takes place, your driveway or parking lot must be free of cracks and crevices. This will require making repairs that are usually done by a separate contractor. If you have these repairs made before you have the asphalt sealed, it will significantly reduce the overall cost of the job.

Once the preparations are complete, your professional seal coating contractor will apply one or more coats of asphalt sealer. It is important that the sealant be allowed to dry overnight for best results. The drying time will help the new coating to bond with the existing blacktop and create a smooth surface that is impervious to weather, oils, and chemicals.

During the process of applying the sealant, your driveway or parking lot will be power washed to remove any dirt and oily debris that is present. It is essential to clean the asphalt thoroughly before seal coating to ensure that the new material will bond properly with the old surface. A gas blower, degreaser, scrub brush, and water hose should be used to accomplish this task.

Before choosing a sealant, consider the types of pavement your property has and how much traffic it will receive. The most common and least expensive option is coal tar, which holds up well to the elements and blocks UV light. Other options include rubberized asphalt and acrylic seal, which are more expensive but offer greater flexibility and are environmentally friendly.